It’s an easy process, and there’s even a video tutorial if you want to get started.

You can get a basic molding kit for about $40 at Home Depot, but a better solution might be to get a high-quality resin molding machine, which costs about $1,000.

The downside to this machine is that it requires a little more investment, so we’d recommend getting one if you’re looking for a budget alternative.

The first thing you need to do is create a mold for your door mold.

Here’s how.

Step 1.

Fill a small cup with water and mix the sugar and water together.

Pour it into a mold.

Step 2.

Mix the mixture together, and set it aside to dry.

Step 3.

Next, you’ll need a way to transfer the mold into your mold.

The easiest way is to use a silicone mold, but the problem is that silicone molding machines require some serious tools to make a perfect mold.

To make it easier, we recommend making a template and then buying the right size mold for the size of the door.

In this example, we’re making a large-scale mold for a single door, but you can also make a smaller mold to fit multiple doors.

You’ll want to make sure the mold is large enough so that the doors don’t touch.

Step 4.

Place the mold in the refrigerator to dry out for about two weeks, and then you can put it in your molding shop and start molding.

The mold will likely take longer than expected because the sugar will harden over time.

You should also be able to get the mold to harden by pouring the mixture into a blender and blending it.

If you can’t make it to the desired consistency, you can grind it down a bit by hand or by hand and glassblowing it.

Step 5.

Once you’ve created a mold, it’s time to make the door mold!

It takes about 15 minutes to create a perfect door, so make sure you’ve got the right tools, especially the right molding knife.

The plastic molding is great for doors that are too large to fit through, but for smaller doors, the resin mold will work just as well.

Step 6.

Once the mold’s fully assembled, you should be able move the door open or close, depending on how much you like the door’s appearance.

The door mold will also have a little plastic strip on the top of it, and the door will look a little bit different if you use the plastic strip to glue the door back on.

Step 7.

After a few days, you will probably have the door ready to show.

You’re almost done!

This is a great way to show off your door for the guests who walk through.

It’s best to use the door as a reminder of how you built your own, but it’s also a great thing to hang on your wall or give to someone who loves to see your creations.